Tag Archive: remote outlet

Electronic Vampire Slayer

I can now easily turn of my TV and components after using them and leave them off 20 out of 24 hours. Also using one on our coffee pot, eliminating that energy drain too (It has a digital clock). Love, love, love this switch!

Just set the $/KWh and then you’re ready to go. I plugged my home theater power strip into this and it shows me how much electricity my whole setup uses. The long cord attached to the screen is nice and you can leave the device on a desk or table while your electricity socket is further away.

Its a little wide but it only covers one outlet and it should fit well anywhere. my favorite part is the switch itself. The switch flips easily and clicks making it easy to tell it has been activated. The light on the switch is also great to confirm if it is on or off without any guessing.

I always felt guilty for leaving my night stand lamps and such plugged in (never enough to unplug them) so I thought I’d give this a go. My energy bill has gone down and I loved it so much that I just bought another one for the kitchen. I’ll probably end up buying another one next year, besides with the energy savings it pretty much paid for itself several times over. As you saw with the other reviews it’s a no brainer to use and easy on the eyes. Buy a couple you won’t regret it!

After scanning for vampire devices using the Beling energy monitor I settled on installing thie first switch in my Keurig – which appears to draw 5-10 watts even when turned off. Looking to get another one for a fan we have in the hallway for white noise for the kids – the switch makes it much safer for them to turn it off and on.

I have a multi-adapter plugged into this switch which then goes into the outlet and with one click I can turn off all the devices connected to the adapter via this switch. This gives a nice alternative to using a power strip with a off/on switch.

I hated that it drew electricity even when I wasn’t using it. Then I got one for the flat iron and the clothes iron. I have a large closet where my ironing board is up all the time but the iron is rarely used. Thirty minutes is more than enough time and this allows me to leave the house with no worry that an iron was left on. I use on also on the bedroom TV. I set it for 3 hours but usually I turn off the TV earlier. I like that it stops the draw for the rest of the night/day when the TV is not used at all. I would improve it with an “off button” but it’s not too hard to reset by pulling it out of the socket. Rarely do I need to stop it anyway. Just a nifty discovery for me!

Pretty Simple and Effective Product

Given that the GFI sockets in my kitchen are mounted sideways (I’d have to replace them to get them mounted vertically, that’s too expensive) I can’t see the lighted switch too well because it’s facing the top of the counter instead of being out to the side.

It’s an excellent concept of item but I don’t see why they did not add some kind of plastic reflection that would use the same light in the device for the switch to also add some light to the face of the device. That would make it a lot easier for people in my situation, seeing as a lot of homes built only 20 years ago will have similar sockets as I have in my kitchen because that was all that was available.

I had to reduce it by a star because of this. If you have plugs in your kitchen or wherever for that matter that don’t have this issue by all means pick it up, it works pretty good and will help reduce useless power consumption on items that don’t need to be sucking power all the time. I’ve been using a multitude of power strips for this very purpose for years and it does help to cut down drastically on power consumed when you do it all over your house. I had done calculations before on how much power I was saving by this method about a year ago and I found that the bills were about 10-20 dollars different each month I had all the extra items “unplugged” by turning off the power strips to those devices when they weren’t needed, it also depended on how much I was using those devices as well. It also means less wear and tear on items as well. So you end up saving even more by not having to replace things as often. I’ve used a wattage consumption tracker on a few occasions to test how much some of the items that I turn off with this little plug in switch use and it was substantial when added up.

Be smart about your power usage and turn off and unplug items that don’t need to be used 24 hours a day… You’ll spend less and replace less.

It also does not block the other plug in the outlet. The product saves energy by not leaving devices drawing power longer than necessary. I like that because it saves me even more money.

I paid $25 and had 2 day free shipping before christmas, it made two other good Christmas presents. I really wanted a battery backup model, but not sure why (!) This model doesn’t have a battery, but its not needed. I am pleasantly suprised how good this model is. I really like the long cord between the plug and the output lcd screen. It comes preset for 11.6 cents a kilowatt hr, which is pretty close to what we pay here in the panhandle of Florida. I was amazed at how many watts my large barn fan uses on low let alone medium and high, (145 watts). It will tell you watts per month or per year and how much it will cost per month or per year based on that rate per kilowatt hour that you can manually change. If you want a really accurate estimate you have to wait about 45 minutes with the device plugged in while your energy monster chows down. Now here a another good marketing money maker, they need to make a cheap one to measure the costs per room instead of each individual appliance. They are out there but I don’t want to spend $200.

I Love Saving Energy with These Things

We use them every night to charge ipads, ipods, kindles, phones, etc, etc.. And although it will probably take years to save enough energy to recoup the purchase cost, I like the idea of being green. (I’d guess hybrid car owners buy a disproportionately high number of these). I do have another motive though. Most new device batteries, which are usually lithium ion, are maintained best when they are charged often after any use, but they shouldn’t sit constantly on a charger. After I use a device, it goes on a charger for the night, and I don’t have to worry about forgetting to take them off in the morning, even if I don’t use them for days. And finally, these are great for toys and game machines and TVs that the kids use for a couple hours, but stay in a power-using standby mode if left plugged in.

I put up 50,000 Xmas lights every year and sometimes I melt stuff. So the Belkin does not tell me Amps…but it does tell me Watts that are being drawn and I can do the math. So, I finally have a device that tells me what I need to know without finding out by trial and error.

This handy gadget allows me to set it to run for either 1/2 hour, 3 hours, or 6 hours. My sinuses are happy and my room does not get drenched in moisture. win/win. I am sure there are many other uses for this socket also.

It works as intended and is priced fairly. The only problem is that most households would need lots of these things, since many tv’s also have dvr’s and/or video games for example. For those instances, I think a surge protector with an off switch is a better choice, and this would be better suited for the spare tv’s or other single items in your house. For that use, it is a smart choice.

I plugged my devices into the switch when I need them I turn it on and when I don’t I turn it off. No green LED or anything in the device sucking power when I don’t need it. It also had the switch on side I needed it on.

I love this product. I have a Chi that does not have an auto shut off so many times I have had to return to the house to be sure I unplugged it. This devise works better than any other timer i have used. The only reason it received 4 stars instead of 5 is because, as others have mentioned, you cannot plug anything else in the other socket when this is being used. Other than that, I love it!

The power switch is located on the right side of the unit and glows green when power is enabled. We use ours with a cell phone charger. It’d be nice if Belkin sold these in a 3-pack value set. I’d love a few more for around the house. I recommend it.

Works Fine, but the Power is in Your Hands

I used it as the kill switch for our charging station, which charges all our iPhones, iPods, iPads, and supplies power to our printer and handheld vacuum, among other devices. They draw a lot of unnecessary current when we are not home, so this is an ideal place to use a device like the Power Switch during the day when power is not needed. Of course because this is a strictly manual switch, you run the risk that if you forget to turn it back on at the end of the day and just plug in your phones, etc., then of course your devices will not get power and will fail to recharge overnight. This happened to me a few times already. So while this Power Switch does exactly what it is supposed to, you need to remember to turn it back on if you use it in a situation like the one I described. The Power Switch might also be useful when you leave for trips, etc. however in that case it may be just as easy to unplug your power cords from their wall sockets as the net result will be the same.

It is a vert trusted and high quality manufacturer of electronic peripheral devices and accoutrements. Get this and use it with confidence. Save energy ( & money on yiour electric bill) by plugging into this switch. Pays for itself in no time!

Plug this in and flip and switch on the side and no more vampire sucking energy is used when an appliance is off yet still plugged into a socket. Flip the switch and the plug is live and ready to use. I love this and would use them in every room in the house. My kids liked it too.

Not that the action itself is annoying, but repeated plugging and unplugging causes wear on the outlet prongs over time, and I don’t want to draw phantom/vampire energy by keeping the charger plugged in. Besides, keeping things plugged in all the time doesn’t feel safe especially when the power supply gets warm even when your device isn’t connected.

This completely solves the problem, and helps save some dough on the electricity bill. Plug the switch into the outlet, plug the charger into the switch, and now I can simply flip the switch off when I’m not charging up the laptop, or any electronic equipment for that matter. I could see it being handy in the kitchen for your toaster, blender, microwave — you get the idea. Perfect for small spaces where you don’t need a giant 6-outlet strip getting in the way.

The switch is translucent with a green LED inside, so when the switch is on, it’s easy to tell that it is, even in low light. I am going to order a couple more for around the house. A great buy!

Great Way to Kill Off Vampires

I love this product. I have a Chi that does not have an auto shut off so many times I have had to return to the house to be sure I unplugged it. This devise works better than any other timer i have used. The only reason it received 4 stars instead of 5 is because, as others have mentioned, you cannot plug anything else in the other socket when this is being used. Other than that, I love it!

The execution is excellent; the white with green accents is very sleek, and the light in the switch makes it easy to see at a glance whether the outlet is on or off. Now I just need to order about 20 more!

The power switch is located on the right side of the unit and glows green when power is enabled. We use ours with a cell phone charger. It’d be nice if it sold these in a 3-pack value set. I’d love a few more for around the house. I recommend it.

Given that the GFI sockets in my kitchen are mounted sideways (I’d have to replace them to get them mounted vertically, that’s too expensive) I can’t see the lighted switch too well because it’s facing the top of the counter instead of being out to the side.

It’s an excellent concept of item but I don’t see why they did not add some kind of plastic reflection that would use the same light in the device for the switch to also add some light to the face of the device. That would make it a lot easier for people in my situation, seeing as a lot of homes built only 20 years ago will have similar sockets as I have in my kitchen because that was all that was available.

I had to reduce it by a star because of this. If you have plugs in your kitchen or wherever for that matter that don’t have this issue by all means pick it up, it works pretty good and will help reduce useless power consumption on items that don’t need to be sucking power all the time. I’ve been using a multitude of power strips for this very purpose for years and it does help to cut down drastically on power consumed when you do it all over your house. I had done calculations before on how much power I was saving by this method about a year ago and I found that the bills were about 10-20 dollars different each month I had all the extra items “unplugged” by turning off the power strips to those devices when they weren’t needed, it also depended on how much I was using those devices as well. It also means less wear and tear on items as well. So you end up saving even more by not having to replace things as often. I’ve used a wattage consumption tracker on a few occasions to test how much some of the items that I turn off with this little plug in switch use and it was substantial when added up.

Be smart about your power usage and turn off and unplug items that don’t need to be used 24 hours a day… You’ll spend less and replace less.

Fantastic Way to See What Anything You Plug in Uses for Energy!

I have an older model and needed more. I really like this Conserve Power Switch and the new style is nice. They are both economical and terribly useful.

I wish the unit could be thinner but it does the job. Three setting; 6, 3 and 30min as I recall. No more leaving my chargers on all the time. I have an old electric razor whose batteries are dead. Leaving it plugged in was a waste of power but this unit allows me to set the charge time for 30min and I can shave with my old razor. It was worth the money. I am thinking about getting one more.

It works as advertised- select the time to charge, hit the top button and it shuts off after charging for that amount of time. What I dislike about this product is that the time spans given of 1/2, 3 & 6 are too ridged for me. Find that I charge my instruments by the half hour several times to keep from having to have it on for the full 3 hours. I only need 1.5 hours to charge most things and think that adding a 1 hour option would have served this product well or to have it shut off automatically after it somehow senses that the charge is full. My other complaint is that my children like to push the ‘on’ button just to see the green light. Probably should have been made so that it doesn’t turn on to charge something when nothing is plugged in. With these two changes I would have given it 5 stars but it would probably cost a lot more as well.

While this is really nice, it’s not really any better than unplugging your device from the wall. Either way, when you want to use the device you have to reach to the outlet, and either plug in your device, or flip the switch. Then, when you’re done, you have to reach to the wall and unplug the device, or flip the switch. Flipping the switch doesn’t really take any less time than unplugging the device. While these outlets do look cool, and do do what they’re supposed to do, I’m not convinced it’s worth the cost.

This can be used for Blueray players, DVD players and similar devices that consume some power even when powered down. A simple flick of the switch to off position will cut off all power to the device. It works as advertised but I prefer the other products such as smart power strips that cut power when you turn the main device off. That type of strip does the turn off automatically of the other devices so you never have to think about it. This device is probably better suited for a kitchen for coffee makers and other applicances that pull power.

I’ve owned many power strips, USB hubs, surge protectors, printer cables, and peripheral-sharing switches. Every single device has performed reliably over time, exactly as advertised. This little energy-conserving device appears to be another fine product. You plug the device into a wall outlet, plug an appliance into the device, and the device turns the wall outlet and the plugged-in appliance on or off, with the flip of a little switch. The switch lights up in green to show that the wall outlet is delivering power to whatever it is that is plugged into the device.

When it is plugged into a wall outlet, the on/off switch is quite close to the wall. This means that it is just as easy to unplug whatever is plugged into the outlet as to flip the switch. So the main use for this switch that I see is to be able to turn off a device that you don’t want to plug and unplug all the time (to avoid wear and tear on the power cord).

As a matter of design, the lighted on/off switch isn’t particularly well-placed–it’s on the right side, not on the front. This means that when the device is plugged in, the lighted switch may be facing away from you or downward (depending on how your wall outlets are oriented), and you won’t be able to tell at glance whether the outlet is on or off.