Tag Archive: Nice Solution

A Very Nice Solution to a Real Problem

I only use it in the morning and was looking for a way to shut it off when not needed. Un plugging and re plugging is not good for the receptacle so I tried a timer. The small plug in units fail after a few months I suspect due to the high amp draw.

This is the perfect solution. I turn it on when I get up in the morning and shut it down at about 9:00. Works great and fixed my little old problem. Highly recommended..

I got it to help conserve energy in with my heater fan and though there is not a marked difference in my electricity bill, I feel better that I am trying to make steps to reduce my energy usage. And it can shut off after 3 hours, so if I forget to unplug my heater fan, I don’t have to worry about my cats bumping it and starting it up again or it catching something on fire.

What we do use it on is an electric room space heater where I am worried about forgetting it and leaving it on overnight — maybe burning down the house while we sleep. If you forget, and I have so far exactly once, then this device automatically shuts it down for you. Also, it saves you electricity money, about 10 cents an hour in our case, when we forget, which could easily cost you a buck or two if you leave that heater on overnight and into the next day in your (like we have) basement office. You could also use it to automatically shut down your kids’ video game after they have used up their time allowance, hint, hint ;-)

It’s especially nice for a a few that don’t really have an on off switch (like a Krupps burr grinder that feels warm whenever the power is on even if it’s not grinding). The glowing green light (indicating ‘on’) makes it really easy to see when everything is turned off.

I hoped the lighted switch would alert me that I had forgotten to turn the power off. Unfortunately, I feel that the lighted switch is a little dim and hard to see, as it is located on the side of the device. It does what it is supposed to do — you just have to check it with all the kitchen lights turned off.

There are three buttons for measurements. Watts, cost per period of time and CO2 effect. I use just in the wattage position to use . What makes it easy – Plug into any outlet, plug device to be tested and the gauge shows the wattage beginning used. The two parts are interconnected by a four to five foot cable which makes it so much easier to read. I have read wattage, so far, from 4 watts for a LED light bulb to 1400+ for a coffee maker.

I programmed my usage rates in and was able to see how much it cost both hourly and monthly to run items in my home. If you want to see why your energy bill is so much try this. I was suprised how much some things cost to run.